Watts GTS450C Скачать руководство пользователя страница 10

Страница: 10 / 20

Page 10

Reverse Osmosis Module Mounting

Step 22

Determine best location for the RO System to be mounted to allow

for future system maintenance. The parts bag has 2 self tapping

screws. Using an electric drill with a Phillips bit, screw them into

the cabinet wall 6” apart and 16” from the bottom of the cabinet.

Yellow Tube Connection - RO System

Step 20 Position the storage tank in desired location. Measure the

yellow tube from Tee fitting to tank and cut it to desired length.

Step 19 Locate the yellow tube

and a plastic tube insert in the parts bag.

Push the entire plastic insert into yellow tube. To

connect the

tube to the Tee fitting on the post filter which is clipped on to the

membrane housing,

slip the yellow tube through the white

compression nut, hand tighten the white nut and add 1/4 turn

with a wrench.

(Refer to diagram on page 5)

Locate a plastic

tube insert in the parts bag.

Push the entire

plastic insert into the yellow tube connected to the RO system in

previous step. To

connect the tube to the tank ball valve fitting on

the storage tank,

slip the yellow tube through the white

compression nut, hand tighten the white nut and add 1/4 turn

with a wrench.

(Refer to diagram on page 5)

Step 21

Thread the plastic ball valve onto the tank fitting -

ball valve must seal against rubber

O-ring on tank. Do not over tighten or the valve could crack.

Make sure the O-ring is located at the bottom of the recess for the tank connection.

Do not use Teflon tape!

Compression

Nut

Plastic Tube

Insert

Tee Fitting

Yellow Tube

Yellow Tube Connection - Storage Tank

Thread the plastic ball valve onto the tank fitting.

Do not over

tighten or the valve could crack.

Locate the Teflon tape roll in the parts bag. Teflon tape must

be applied in a clockwise direction. Wrap 5 to 7 turns around

the male pipe threads (MPT) on the Stainless Steel fitting on

top of the tank.

Tank Valve Installation

Compression

Nut

Plastic Tube

Insert

Ball Valve

Yellow Tube

Step 17 Choose your configuration (A - Metal Tank or B - Plastic Tank):

Metal Tank

Plastic Tank

Step 18A

Step 18B

Содержание GTS450C





















Результаты поиска

Содержание GTS450C

Отзывы:

Похожие инструкции для GTS450C

Бренды по названию

Популярные бренды

Watts GTS450C, Инструкция по установке, эксплуатации и обслуживанию

Результаты поиска

Содержание GTS450C

Отзывы:

Похожие инструкции для GTS450C

Бренды по названию

Популярные бренды