Page 17
RECOMMENDED REPLACEMENT PARTS AND CHANGE INTERVALS:
Note: Depending on incoming feed water conditions replacement time frame may vary.
Description
Part #
Change time Frame
Sediment Filter, 5 Micron, 9 7/8”:
#FPMB5-978
6 Months
Carbon Block, 5 Micron, 9 3/4”:
#WCBCS975
6 Months
In-line Carbon Filter:
#AICRO
12 Months
TFC Membrane, 50GPD @60PSI:
#W-1812-50
2 to 5 years
FAX: 210-677-8400 Phone: 800-659-8400 WWW.WATTS.COM
GENERAL USE CONDITIONS:
1. System to be used with municipal or well water sources treated and tested on regular basis to insure bacteriological safe quality. DO NOT use with water that
is micro biologically unsafe or unknown quality without adequate disinfection before and after the system. Systems certified for cyst reduction may be used on
disinfected water that may contain filterable cysts.
2. Operating Temperature:
Maximum: 100°F (40.5°C)
Minimum: 40° (4.4°)
3. Operating Water Pressure:
Maximum: 100 psi (7.0kg/cm2)
Minimum: 40 psi (2.8kg/cm2)
4. pH
2 to 11
5. Maximum iron present in incoming feed water supply must be less than 0.2 ppm.
6. Hardness of more than 10 grains per gallon (170 ppm) may reduce membrane life expectancy.
7. Recommend TDS (Total Dissolved Solids) not to exceed 1800 ppm.
TECHNICAL & WARRANTY INFORMATION
TECHNICAL & WARRANTY INFORMATION
