2
FRIWAC-IM-DE-W-UK-10-2021-Rev.0 | Part no. 10084532
EN
ENGLISH
1 General information
1.1 Important notes about the Installation and
Operating Manual
NOTICE
The operator is responsible for ensuring
adherence to the local laws and regulations (e.g. accident
prevention regulations, etc.).
Incorrect operation or operating the domestic fresh water
unit contrary to the specifications shall void all rights to any
warranty claim.
This Installation and Operating Manual
• is part of the domestic fresh water unit
• contains instructions and information for the safe and
correct installation and commissioning of the domestic fresh
water unit
• must be available to all users throughout the entire service
life of the domestic fresh water unit
• is intended for trained personnel who are familiar with the
applicable standards and provisions and, in particular,
with the relevant safety concepts and the operation and
maintenance of the domestic fresh water unit
• is protected by copyright and may not be altered without
the manufacturer’s permission
1.2 Product conformity
This domestic fresh water unit conforms to the 2006/42/EC
machinery directive.
1.3 Product features
Domestic fresh water unit with built-in controller for sanitary
domestic hot water generation using the instantaneous water
heater principle. Domestic fresh water units of the FRIWAC
Series are available in the following variants: FRIWAC WT26
and FIRWAC WT40.
• Compact, space-saving design
• EPP insulation shell
• Electronic draw-off temperature control
• All system connections with 1" union nut, flat sealing
• Stainless steel pipework
1.4 Scope of delivery
• Domestic fresh water unit with EPP insulation shell
• Wall mounting set
• Operating instructions: FRIWAC domestic fresh water unit,
circulation pump, controller
Content
1 General information .................................... 2
1.1 Important notes about the Installation and Operating Manual ....2
1.2 Product conformity .........................................................2
1.3 Product features .............................................................2
1.4 Scope of delivery ............................................................2
2 Safety ........................................................... 3
2.1 Safety notices .................................................................3
2.2 Important safety information ...........................................3
2.3 Intended use...................................................................3
2.4 Foreseeable misuse ........................................................3
2.5 Operator’s responsibility ..................................................3
2.6 Users ..............................................................................3
3 Technical features ....................................... 4
4 Thermal output data .................................. 5
4.1 FRIWAC WT26 thermal output data................................5
4.2 FRIWAC WT40 thermal output data................................6
5 Pressure loss diagram ............................... 7
5.1 FRIWAC WT26 pressure loss diagram ............................7
5.2 FRIWAC WT40 pressure loss diagram ............................8
6 Dimensions .................................................. 9
7 Component overview ............................... 10
8 Installation and commissioning .............. 11
8.1 Installation ....................................................................11
8.2 Starting the unit ............................................................12
8.3 Starting the controller ...................................................12
............................................. 13
9.1 Annual maintenance schedule ......................................13
9.2 Replacing wear parts ....................................................13
9.3 Decommissioning .........................................................13
9.4 Recommissioning .........................................................13
10 Disposal ..................................................... 14
10.1 Return to manufacturer ...............................................14
10.2 Informing authorities and the manufacturer ..................14
11 Warranty..................................................... 14
