The descriptions and photographs contained in this product specification sheet are supplied by way of information only and are not binding. Watts Industries reserves the right to carry out any
technical and design improvements to its products without prior notice.
Warranty: all sales and contracts for sale are expressly conditioned on the buyer’s assent to Watts terms and conditions found on its website at www.wattswater.eu/gtc/ Watts hereby objects
to any term, different from or additional to Watts terms, contained in any buyer communication in any form, unless agreed to in a writing signed by an officer of Watts.
FRIWAC-IM-DE-W-UK-10-2021-Rev.0 | Part no. 10084532
Watts Industries Deutschland GmbH
Godramsteiner Hauptstr. 167 • 76829 Landau • Germany
Tel. +49 6341 9656 0 • Fax +49 6341 9656 560
[email protected] • www.wattswater.de
© 2021 Watts
11 Warranty
WATTS products are tested extensively. WATTS therefore
guarantees only the replacement or, at the sole discretion
of WATTS, the free-of-charge repair of components of the
supplied products where these, in the opinion of WATTS,
exhibit verifiable manufacturing faults. Warranty claims due to
defects or defects of title may be asserted within one (1) year
of delivery/transfer of risk. Excluded from the warranty are
damages attributable to normal use of the product or wear
and damages resulting from modifications or non-authorised
repairs on the products, for which WATTS rejects all claims
for compensation (direct or indirect). (For more detailed
information, please refer to our website.) In all cases, supply
is subject to the General Terms and Conditions, which can be
found at
www.wattswater.eu/gtc/
.
10 Disposal
!
!
WARNING
Improper disposal can lead to
contamination of the environment and groundwater!
h
When disposing of components and operating materials,
the provisions and guidelines of the country of use must be
observed.
1. Make sure the current to all subassemblies and components
has been disconnected.
2. Remove the domestic fresh water unit in the correct way or
engage a specialist company to do this.
3. Separate the subassemblies and components into
recyclable materials and operating materials.
4. Dispose of the subassemblies and components in
accordance with local laws and provisions or take them to
a recycling facility.
10.1 Return to manufacturer
Contact the manufacturer if you wish to return the domestic
fresh water unit or component parts.
10.2 Informing authorities and the manufacturer
Inform the manufacturer when decommissioning and disposing
of the domestic fresh water unit for statistical purposes.
