3
Kit Components
The sensor connection kit includes the following four components. If any item is missing, speak with
your account representative.
Requirements
• #2 Phillips screwdriver
• Polytetrafluoroethylene (PTFE) tape (optional)
• Instrument with small tip to change DIP switch settings
• Power source, ranging from 12V to 24V
• Wire stripper
A. Flood sensor with male 2" NPT connection
The connection kit is suitable for installation on a metal air gap
or pipe fitting with 2" female NPT connection.
NOTICE
B. Sensor activation module with an 8' 4-conductor electrical
cable, ground wire, and 4 attachment screws
C. 24V DC power adapter (requires a 120VAC, 60Hz,
GFI-protected electrical outlet)
