Page 7
Remove nut (item 11) and blue tubing (item 12) from faucet (Leave the nut and plastic delrin
sleeve (item 10) on the blue tube).
Feed both the red and black tubing through the pre drilled hole in the sink/counter until faucet
is seated.
Step 7
Under the sink - on to the threaded faucet stem in order first slide on the rubber gasket (item
6), the slotted washer (item 7), the white spacer with the open end UP (item 8), the hex nut
washer (item 9), and lastly secure with nut (item 11).
Step 8
Make sure the plastic delrin sleeve (item 10) is on the end of the blue tube, push the white
plastic insert (item 13) into the end of blue tubing with the delrin sleeve, insert the blue tube
(item 12) into the faucet stem and secure with nut (item 11).
Note:
DO NOT overtighten nut.
WATTS
Premier Standard Faucet Installation - Part# 116001
Step 6
Step 8
