Watts Industries BT-DPRF-02, Руководство пользователя

Страница: 8 / 126

8
Time and Date adjustment 2.2
Each time a value blinks, you can adjust it with the (-) and
(+) keys, once the value is chosen, validate it with the (OK)
key. The thermostat will jump automatically to the next
value.
Note: you can always come back to the previous value by
pressing the escape key
( ) .
List order of the time and date adjustments:
Time and day:
Adjustment of the hours,
Adjustment of the minutes
Adjustment of the day (1 = Monday)
Date:
Adjustment of the day number
Adjustment of the month number (01 to 12)
Adjustment of the year
Then
the message “
Save
” and blinking green LED
appears, press (OK) to validate the adjusted time and date.
You can always reach the time and date adjustments, by
pressing and maintaining the edition
( ) key during 2
seconds in normal operating modes.
RF installation 2.3
With receivers 2.3.1
- First of all to configure your thermostat with the receiver,
you must put your receiver in «
RF init ». mode. (please
refer to the receiver leaflet for this, only the RF receiver of
the same range are compatibles)
- Now on the thermostat press and maintain the edition key
( ) during 5s, then the parameter «
RF ini
» must be
display.
The thermostat will send now the radio configuration signal
to the receiver.