![background image](http://html1.mh-extra.com/html/wattbike/cycle-trainer/cycle-trainer_assembly-and-service-manual_3733796007.webp)
Magnetic Brake Lever
The magnetic resistance lever rotates clockwise through one complete turn and is marked ‘1’ through
‘7’ where ‘1’ represents no magnetic resistance and ‘7’ maximum magnetic resistance.
The combination of both air and magnetic resistance means that the wattbike can be used for high
cadence low wattage at one extreme and low cadence high wattage at the other.
6. Preventative Maintenance and Troubleshooting
The Wattbike is constructed from high performance components and is designed to be almost maintenance free and should
withstand heavy usage. If you notice any unusual symptoms, such as loud noises or grinding during operation, stop using your
Wattbike and contact your local Wattbike distributor.
Do not use corrosive or abrasive materials to clean the equipment. Ensure that such materials are not allowed to pollute the
environment.
Daily Maintenance
To ensure your Wattbike stays in first class condition remove all sweat, dust, dirt or other substances by using a clean, soft cloth
and a non-abrasive liquid cleaner. Wipe down the exterior covers and frame, saddle, handlebar and Wattbike Performance
Computer.
Make sure that the handlebar stem and saddle stem are not over the MIN markers.
Weekly Maintenance
Vacuum the floor under and around the Wattbike.
Inspect the feet bolts, saddle and handlebar sliders and Wattbike Performance Computer bracket for looseness. Tighten as
necessary.
Inspect the saddle and handlebar stem adjustments. Tighten as necessary. Check that the pedals are secure. Tighten as necessary.
Ensure that no sweat/ liquid is pooling on the metalwork or covers.
Lubricate, using a 3-In-One Multi-Purpose Spray Oil or similar product, the thread of the locking and adjustment levers.
Check the battery level on the WPC, from Main Menu, Properties, and then Battery. If the level is below 50% charge using the
external charger for a period of 8-12 hours. We recommend that you do this every 1-2 weeks.
Monthly Maintenance
Check for smooth and quiet operation of all moving parts.
Check your WPC firmware version in the
Properties
section. Compare to the latest WPC firmware version at
wattbike.com
and
update if necessary.
Six Monthly Maintenance
Using a 3-In-One Multi-Purpose Spray Oil or similar product lubricate the chain. To do this use place
the straw of spray lubricant between the cover and the chain ring close to the chain itself. Spray
gently down towards the floor and rotate the crank anti clockwise twice.
Set the Zero State on the monitor. From
Main Menu
,
Settings
,
Device Setting
, select
Set Zero State
.
Rotate the cranks anticlockwise 2 turns and then press
Enter
.
7. Calibration
The Wattbike is factory calibrated and does not need further calibration. It is recommended that you set the
zero state
on a
regular basis.
Select
Settings
, then
Device Settings
. Select
Set Zero State
then press
Enter
.
Rotate the pedals backwards for a few revolutions to unload the Wattbike. The cranks should be unladened and in a horizontal
position.
Press
Enter
– the monitor will automatically set zero.
The Wattbike Warranty and Regulatory Information can be found at
wattbike.com/warranty
Содержание cycle trainer
Страница 1: ...ASSEMBLY SERVICE MANUAL ...