10
❑
Push the connectors and wires into the back of the
fuselage pod, then push the flight battery down into the
fuselage pod, making sure that the cloth tab on the flight
battery is toward you, so that you can grab it easily.
✦
✦
✦
✦
✦
IMPORTANT
✦
✦
✦
✦
✦
The fuselage pod is molded to fit the
flight battery. The flight battery will fit properly only
one way. The wider, flat side should be toward you,
as shown.
The cloth tab that is attached to the flight battery allows you to easily remove it for charging, by simply
grabbing and pulling on the tab.
❑
Reinstall the battery door, making sure that the plastic latch "snaps" firmly into place.
PRO TIP
STEP 6: INSTALLING THE PROPELLERS
❑
Carefully install one propeller onto each motor shaft. To
install the propellers correctly, simply push them firmly onto
the motor shaft.
Two extra propellers have been included
should you break one during landing. We suggest keeping
the extras with you while you're flying, just in case.
PRO TIP
Now that you're done assembling your
Wind Craft RTF R/C Kite-Plane, it's time to
learn how it's controlled and how to fly it.
That's done in the next section.
