Watt Drive 15 H3, Руководство пользователя, Страница: 12 / 54

10
Stall Prevention 12 xxx0 : Stall prevention during accel. Enable
xxx1 : Stall prevention during accel. disable
xx0x : Stall prevention during decel. enable
xx1x : Stall prevention during decel. disable
x0xx : Stall prevention during running enable
x1xx : Stall prevention during running disable
0xxx : Stall prevention decel. time set by Fn 02
1xxx : Stall prevention decel. time set by Fn 15
0000
13 Stall prevention starting level
during accel
1% 30-200% 110%
14 Stall prevention level during
running
1% 30-200% 160%
15 Decel time during stall prevention 0.1 sec 0.1-3600 sec 3 sec *1
Direct start &
Reset &
numbers of input
signal scanning
16 xxx0 : Direct start enable when remote RUN command ON
xxx1 : Direct start disable when remote RUN command ON
xx0x : Reset effective only if remote RUN command OFF
xx1x : Reset effective disregard of remote RUN command condition
00xx : TM2 will scan 10 times
01xx : Tm2 will scan 5 times
10xx : Tm2 will scan 3 times
11xx : TM2 will scan 1 time
0000
Multi-Speed 17 Multi-speed 1 0.01 Hz 0-400 Hz 5.00 Hz *1
18 Multi-speed 2 0.01 Hz 0-400 Hz 10.00 Hz *1
19 Multi-speed 3 0.01 Hz 0-400 Hz 20.00 Hz *1
20 Multi-speed 4 0.01 Hz 0-400 Hz 30.00 Hz *1
21 Multi-speed 5 0.01 Hz 0-400 Hz 40.00 Hz *1
22 Multi-speed 6 0.01 Hz 0-400 Hz 50.00Hz *1
23 Multi-speed 7 0.01 Hz 0-400 Hz 60.00 Hz *1
Jog freq. 24 Jog freq. reference 0.01 Hz 0-400 Hz 2.00 Hz *1
Master freq. 25 Master freq. reference from digital
operator
0.01 Hz 0-400 Hz 5.00 Hz *1
Analog input 26 Freq. reference 0.01 Hz 0.0-400 Hz 0 Hz *1
freq. 27 Voltage reference ratio 1 0.1 % 0-100.0% 0% *1
command 28 Voltage reference ratio 2 0.1 % 0-999.9% 100% *1
29 Positive / Negative direction 1 0 : Positive
1 : Negative
0 *1
Power voltage 30 Voltage of power supply 0.1 V 200 - 480 V *3