watt box WB-OVRC-UPS-1100-1, Руководство пользователя

Страница: 2 / 19

pg.2
WB-OVRC-UPS-1100/1500/2000 Owner’s Manual
PACKAGE CONTENTS
(1) UPS
(1) Owner’s manual
(1) Detachable power cord
(1) USB cable (2) Upright mounting bases
(4) Rack mounting brackets
(8) Mounting bracket screws
(1) CD
FRONT PANEL
1 2 4 3
1. Power LED – Illuminates solid blue when the UPS is powered on.
2. Removable Battery Cover – Snap the cover off to access the batteries for connection or replacement.
3. LCD Screen – Used for monitoring and setup of UPS software features.
4. LCD Control Buttons – Used for turning the UPS on and off, navigation and selection in menus, and muting alarm tones.
REAR PANEL (SEE DIAGRAMS ON OPPOSITE PAGE)
1. Circuit Breaker – Resetting circuit breaker that trips out the unit when over-amperage conditions occur.
2. EPO (Emergency Power Off) – Two-pin terminal for turning the UPS on (pins connected) and off (pins separated). Leave the jumper in place
if not required.
3. USB Port – Connect an automation system or a computer to control and monitor UPS operation through management software.
4. Power Outlet – Connect the WattBox IP power cord.
5. Ground Lug – Ground post for bonding equipment.
6. Power Inlet – Inlet power cord that connects to the supply outlet.
7. WattBox Interface RJ45 Port – Connect to the UPS Link port on the WattBox IP. Uses standard Ethernet LAN cable.
8. SNMP Card Slot – Remove the cover to install the optional UPS SNMP Card (not included).