4-20mA Output (Un model only)
Select
4-20mA
to configure the pumps 4-20mA output response.
Use
+/-
and
SELECT
to choose the required setting
Full scale
– The 4-20mA output will be based on the full speed range of the pump. At 0 rpm
the pump will output 4mA. At maximum rpm the pump will output 20mA.
Match input scale
– The 4-20mA output will be scaled to the same range as the 4-20mA
input. If the 4-20mA input has been scaled to provide 4mA=0 rpm and 20mA=20 rpm then
an input of 12mA will result in a set speed of 10rpm and an output of 12mA
m-qdos-en-02
103
