Watkiss Automation PowerSquare 200, Руководство пользователя

Страница: 12 / 80

2 - How to Run the PowerSquare - Adjust the Stacker
8
Watkiss PowerSquare™200 User Manual
Job Setting for a Saved Job
1. Touch
LOAD & SAVE
.
2. Touch the job name or use the Up arrow and the Down arrow to select the
job.
3. Touch
LOAD
.
4. Wait until the PowerSquare is ready.
Adjust the Stacker
Adjust the collection table on the stacker according to the size of the finished
book. See “Adjust the Stacker Collection Table” on page 27.
Adjust the Position of the Gate in the Gathering Area
Adjust the gate in the gathering area into the ‘up’ position for jobs of 1 to 3
sheets or the ‘down’ position for jobs of more than 3 sheets. See “Adjust the
Gate in the Gathering Area” on page 28.
4 Enter the page rotation set-
ting. For A4 paper size, the normal setting for
ROTATE
is
ON
. Rotation lets the printer oper-
ate at optimum speed.
Touch
ROTATE
to turn the sheet rotation
ON
or
OFF
. Always select the page direction
before you change the rotate setting.
5 Enter the set thickness. Touch
THICKNESS.
Enter the measured
value.
6 Enter the number of
stitches. Touch
STITCHES
and enter the number of
stitches.
7 Enter the spine form set-
ting. The spine form setting is automatic, accord-
ing to the
THICKNESS
setting. If needed, the
setting can be changed. See “FORM” on
page 15
8 Enter the trim setting. The trim setting is automatic, according to
the
PAGE SIZE
and
THICKNESS
settings. To
change the setting, touch
TRIM
. See “TRIM”
on page 16
9
Touch
CLOSE.
Step Action Information