Watkiss Automation PowerSquare 200, Руководство пользователя

Страница: 32 / 80

4 - Standard Tasks - Adjust the Gate in the Gathering Area
28
Watkiss PowerSquare™200 User Manual
Procedure
1. Insert the collection table into one of the three pairs of slots.
Adjust the Gate in the Gathering Area
The gate in the gathering area must be in the ‘up’ position for jobs of 1 to 3
sheets and in the ‘down’ position for jobs of more than 3 sheets. If the gate is left
‘down’ for thin jobs, then the sheets of paper can be damaged or jam in the
machine.
When to do
• When you start a new job
Lift the Gate in the Gathering Area
1. Open the gathering area cover. See “Open the Gathering Area Cover” on
page 24.
2. Lift the gate on the sidelay until the gate engages with the metal spring-clip.
See Figure 16 on page 28.
3. Close the gathering area.
Finished Book
Metric Paper Size
Metric
Dimensions
Finished Book
US Paper Size
Slot
A6 105 x 148 mm 4¼ x 5½ inches

up to A5 148 x 210 mm 5½ x 8½ inches

up to A4 210 x 297 mm 8½ x 11 inches

up to maximum
size 250 x 340 mm 9¾ x 13¼ inches

FIGURE 16. Gate in the ‘up’ position
Metal spring-clip
Gate
Sidelay