Watkiss Automation PowerSquare 200, Руководство пользователя

Страница: 48 / 80

5 - Error Conditions, Problems and Solutions - Paper Jams
44
Watkiss PowerSquare™200 User Manual
Jam before the Trimmer
Step Action Information
1 Open the PowerSquare main
deck.
2 Remove the trim bin.
3 Remove the trimmer infeed con-
veyor. The procedure can be seen from
the top of the machine.
Access to the parts is through the
trim bin opening.
Hold the shaft and push to the
right, against the spring pressure.
Lift the left hand end clear.
4 Remove the book.
5 Remove any paper offcuts from
the trimmer infeed conveyor. A small piece of paper can cover
the jam sensor and generate an
error message.
6 Fit the trimmer infeed conveyor. Insert the right hand end of the
shaft into the bearing, against the
spring pressure. Insert the left
hand end.
7 Fit the trim bin.
8 Close the PowerSquare main deck
and covers.
9 If there is paper in the gathering
area, touch
PURGE SET
.
This action clears paper from the
PowerSquare.
10 Continue the print job.
Trimmer Infeed Conveyor
FIGURE 20. Trimmer Infeed Conveyor viewed from above.