Once water runs clear through the filter, to ensure optimum water purity,
sterilize filter cup by fully immersing in boiling water for about five min-
utes.
DO NOT microwave. Carefully remove filter cup from boiling water
and allow to cool before handling. Rinse briefly with boiled or distilled
water before installing.
Install Filter Cup
There is a label packaged with each filter cup. Write in the date of
installation as a replacement reminder and affix label to filter cup. Place the
sterilized filter cup into opening of distiller spout. Hook the filter cup tab
under cover gasket and apply light, downward pressure away from Cover
until the filter locks into place (fig. D).
Clean
Boiler
Wash inside of boiler with soap and water. Rinse thoroughly. The unit is
now ready for use.
Operational maintenance and replacement requirements are
essential for this product to perform as advertised.
6
Figure C
Filter Cup
Gently apply downward pressure
away from the cover until
the filter cup locks
into place
Gasket
Hook the new filter cup tab
under the cover gasket
Remove the filter cup by
pushing inward and lifting
up to remove
Filter Cup
Tab
Figure D
Filter Cup
Filter Cup
Tab
Gasket
Tab must go
UNDER
gasket
