background image

  

9

   

DISTILLER 

MAINTENANCE

   

WARNING:  Always be sure to unplug power cord from electrical outlet    

 

 

  before cleaning or servicing Distiller.

   

Boiler 

Tank

 

 

  Rinse the boiler tank with warm water before every distillation cycle to

 

 

  remove any loose residue. As scale deposits accumulate, use an approved  

 

 

 

  cleaner, such as 

KLEENWISE

, to remove deposits. You may also use a  

 

 

 

  diluted solution of 

one cup

 white vinegar to every two cups of water.

   

DO NOT operate Distiller with cleaning solution in boiler tank. Use a soft

  

 

   plastic or nylon scouring pad if needed. DO NOT use abrasive cleaners,    

 

 

  caustic acids, steel wool pads or metal utensils. Rinse thoroughly after  

 

 

 

  cleaning. Wipe outside of Distiller with a soft cloth or sponge and mild  

 

   

soapy 

water.

   

Condenser 

Fins

 

 

  Dirty condenser fins can cause poor cooling efficiency. If you notice steam    

 

 

  coming from the filter spout or a decrease in the amount of distilled water,    

 

 

  clean the condenser fins.

 

 

      •  Remove three screws (located under gasket) from the cover (fig. F)

 

 

        and lift off louvered cover top (fig. G).

 

 

      •  Clean accumulated dust/dirt from condenser fins with small brush    

 

 

        or vacuum cleaner (fig. G).

 

 

      •  Replace cover top and secure with the three screws.

   

Collection/Storage 

Bottle

 

 

  See page 5 for cleaning instructions.

Condenser

Fins

Fan Blade

Louvered

Cover Top

Figure G

Содержание 4000













Отзывы: