background image

waterTech Industries residential sOFTMaX softener

5/10 Year warranty

applicable to:

 SOFT

MaX series

WaterTech Industries (WTI) hereby warrants said equipment, only to the original purchaser at the original installation location.

THIS WARRANTY PERIOD BEGINS at the time of initial installation and use. The warranty becomes valid upon registration of the equipment.

10-YEAR WARRANTY ON CONDITIONER TANK AND 5-YEAR WARRANTY ON BRINE TANK — WaterTech Industries will replace or repair 

(at WTI option) any conditioner tank OR brine tank that becomes unusable because of leakage, corrosion or rupture due to manufacturers 

defect . All internal mechanical components are warranted for a period of five (5) years from date of installation.

5-YEAR WARRANTY ON CONTROL VALVE — Your water system has been equipped with the highest quality water conditioning control 

valves available.  If, upon factory inspection, the control valve body or PC board is found to be defective, WaterTech Industries will furnish 

repair or replacement (at WTI option) of the control valve body and/or the PC board.  All internal mechanical components are warranted 

from manufacturers defect for a period of five years from the date of installation.

EXCLUSIONS AND LIMITATION OF LIABILITY — WaterTech Industries' liability for special, incidental, or consequential damages is expressly 

disclaimed. In no event shall WaterTech Industries' liability exceed the obligation of repairing or replacing any part that becomes defective 

under valid warranty coverage as described above. Cosmetic damage that does not affect the process functionality of the equipment is 

not covered. WaterTech Industries makes every effort to ensure that all illustrations and specifications are correct. However, these do not 

imply a warranty that the product is merchantable or fit for a particular purpose, or that the product may not vary from the illustrations 

and specifications.

The warranty contained herein is in lieu of all other warranties, expressed or inferred, including any implied warranty of fitness for a particular 

purpose. Labor and transportation costs incidental to the delivery or replacement of parts other than WTI factory repairs are not covered 

under this warranty. In the event of a warranty replacement or repair, WTI will cover the cost of shipping the covered components. This 

warranty expressly excludes any system which has been damaged by accident, fire, flood, Act of God, abuse, neglect, freezing, excessive 

temperature (below 40° F or above 110° F.), inappropriate pressure (below 20 psi or above 100 psi), misuse, alteration of product in any 

way by owner or installing company, product identification tampering, misapplication, installation or operation not consistent with WTI 

instructions and installation outside of applicable plumbing codes and local regulations.  Furthermore, this warranty expressly excludes 

any system which has been out of service for more than 90 days continuously.  Fulfillment of the warranty coverage by WTI is contingent 

on proper execution of the procedures set forth in the WTI Warranty RGA policy.  No person or representative is authorized to assume for 

WaterTech Industries any liability on its behalf, or in its name, except to refer the purchaser to this warranty.  This warranty gives you 

specific legal rights, you may also have other rights which vary from state to state.

WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE — The warranty registration (via post card or website) must be completed and 

returned to WaterTech Industries within Ninety (90) days of installation to validate the Warranty. Repair work should be performed by an 

authorized WaterTech Dealer. In the event that authorized dealer service is not available, defective components may be returned directly 

to WaterTech Industries for warranty service. The registered owner must contact WaterTech for return instructions and return the defective 

component, freight prepaid, with proof-of-purchase, within the applicable warranty period.

   

 

 

 

 

 

 

 

                            

Warranty 17-02-040

PrODuCT MusT Be reGIsTereD TO aCTIVaTe warranTY 

 VIsIT www.waTerTeCH.COM Or Call 888-254-8412

 16-03-050   06-01-2013

Содержание softmax













Отзывы: