INSTALLATION OF INFINITY
FILTER CARTRIDGE INSTALLATION
STEP
1
Push down the top cap with both hands.
STEP
4
Look down into the tank assembly, and you should see
a small opening centered in the bottom of the tank.
STEP
7
Press down on the filter cartridge so that the double O-ring
seal moves into place within the bottom, center opening.
STEP
10
Pull up on the Top Cap to seat o-rings.
STEP
2
Remove the retaining ring by carefully grasping the handle
and pulling inward, then upward. The retaining ring should
slide completely out of the groove.
STEP
5
Remove packaging from filter cartridge, then place the filter
cartridge into the tank with the double O-ring facing down.
STEP
8
Reposition the Top Cap into its original location.
STEP
11
Place Umbrella Cap on top of system.
STEP
3
Remove the Top Cap from the housing assembly by pulling
the cap out of the top of the tank, by lifting up on the top
handles. Place removed Top Cap on a clean and dry surface,
free of debris, so no contamination of the o-ring occurs.
STEP
6
Position the cartridge so that it is aligned
with the bottom, center opening.
STEP
9
Reattach the top tank Snap Ring.
STEP
12
Run water through system for
10 minutes
before use.
10
4
