Watersnake Venom SXW 34/26, Руководство пользователя

Страница: 18 / 44

18
Watersnake Venom SX Motor Manual ( Ver.2)
RECOMMENDATIONS
WHEN USING YOUR WATERSNAKE MOTOR
IN THE WATER
Upon connecting your battery to your motor, and before setting off in your
boat, make sure that your trolling motor is mounted correctly and stowed
securely. Of course once you engage your Watersnake motor for use make
sure that it is in the right place, not too low or too high. Once you are in deep
water, you should make sure that you gradually increase the speed of your
trolling motor, do not accelerate it up to full speed right away. For example,
if you have a 5 speed trolling motor, don’t click through all of the other
speeds really fast to get to 5, slowly go up to 1 speed, 2 speed, and so on. It is
recommended not to run your trolling motor out of water for long periods of
time.
AFTER EVERY USE
• Disconnect motor from battery.
• Recharge battery as soon as possible.
• DO NOT PRESSURE WASH, EVEN AFTER FRESHWATER USE.
• Wipe your motor down with a wet rag. Concentrate on areas where salt, dirt
and weed fragments are likely to lodge – propeller, motor housing, composite
shaft, depth collar and exposed parts of the mount assembly.
• Wipe these areas with a cloth soaked in warm soapy water and allow to dry.
• Apply a light coating of a non-staining silicone, petroleum-based or lanolin
spray to protect and lubricate exposed parts. Wipe over with a soft, dry cloth.
• Store your Watersnake motor
DISCONNECTED from its battery.
• If boat is stored outdoors, remove Watersnake and store securely indoors in
a cool, dry place.
• If Watersnake is permanently mounted to the boat outdoors, consider
protecting it from harsh sunlight and the elements with a tarpaulin or other
cover.