Watersnake Venom SXW 34/26, Руководство пользователя

Страница: 20 / 44

20
Watersnake Venom SX Motor Manual ( Ver.2)
TROUBLESHOOTING
QUICK REFERENCE GUIDE
A signifi cant number of issues can be caused by a disruption of power supplied
to your Watersnake motor. Careful inspection of your 12v deep cycle battery,
wiring and fuse / circuit breaker set up should be completed before assuming
that there is a fault with your motor.
NO POWER / REDUCED POWER
• Check that battery connection has not been reversed (reversed polarity)
• Check that your 12v deep cycle or LiFePO4 battery is fully charged (+ 12v)
• Check terminals / connections are secure and not loose
• Check terminals / connections / fuse or circuit breaker for any signs of
• damage, corrosion or build up of debris
• If the battery cable has been extended but not replaced, you may be
experiencing damaging voltage drop. Check this table to see if you have the
correct gauge wire for the length of cable extension.
(refer to table on page 9 of manual)
• With the Battery disconnected remove propeller and check for any build up
of fi shing line / weed or any other debris.
• With the Battery disconnected check that propeller pin (shear pin) is in place.
• Armature or magnet cracked or dislodged – grinding noise will come from
motor (Contact the Watersnake distributor in your region.)
NOISE OR VIBRATION COMING FROM MOTOR
With the Battery disconnected check that propeller is securely tightened and
shear pin is in place remove propeller and check for any build up of fi shing
line / weed or any other debris. Rotate the propeller 180º and then recheck for
vibration.
• Check that your 12v deep cycle or LiFePO4 battery is fully charged (+ 12v)
STILL HAVING MOTOR ISSUES?
More information like wiring diagrams,
spare parts and motor repair videos can
be found on our Watersnake motor
support webpage:
https://www.watersnake.com.au/pages/electric-motor-servicing
For more help you can also contact the Watersnake distributor for your region.
( Please see the back cover. )
Scan the QR
code to go to
the Watersnake
support page.