manualshive.com logo in svg

Watersnake Slider Pro SWRC 54/54, Руководство пользователя

Поделиться
Скачать
Watersnake Slider Pro SWRC 54/54 Скачать руководство пользователя страница 5

www.watersnake.com.au

5

WATERSNAKE ELECTRIC MOTORS

Congratulations and welcome to a world of silent motoring. 
Powerful yet silent, the Watersnake electric motors are built to suit all angling 
conditions. High quality materials, superior design and precision engineering 
make these motors hard wearing and reliable.

Please read manual completely before starting installation.

ATTACHING THE MOTOR TO YOUR BOAT

The slider mount integrates a quick release bracket mechanism. 
Attach the bracket to the bow of the boat, taking care to ensure it is on the 
centreline of the boat and placed forward enough so that when the motor is 
attached the shaft of the motor is not making contact with the boats gunwale 
rubber.  With the bracket in position, mark the holes for drilling, ensuring as 
you do that the bow area below the mounting location is clear and accessible.

Mount the plate to the bow using stainless steel bolts, nuts and washers. It is 
important when doing this work that the boat is level.

Place the upper mount of the motor in 
position on the bracket, tighten the lock 
screw and you are ready for the water. To 
release the motor simply unscrew the locking 
plate lock screw located within the mount.

Watersnake Distribution Pty Ltd accepts no 
liability for personal injury or property damage 
caused while drilling/mounting this motor. 
Please wear appropriate protective clothing and 
eyewear/ face shield.)

PLEASE NOTE:

SLIDER PRO

Содержание Slider Pro SWRC 54/54

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды