manualshive.com logo in svg

Watersnake Slider Pro SWRC 54/54, Руководство пользователя

Поделиться
Скачать
Watersnake Slider Pro SWRC 54/54 Скачать руководство пользователя страница 11

www.watersnake.com.au

11

www.watersnake.com.au

www.watersnake.com.au

1

2

3

5

4

REMOTE CONTROL HAND UNIT 

The remote control hand unit offers the ability to control the operation of your 
Watersnake motor without the need to use the foot control or it can be used 
in conjunction with the foot control.  NOTE – the remote control hand unit 
must be synced with your motor (refer below).  The remote control hand unit 
requires “line of sight” communication with the remote receiver in the head 
of your Watersnake motor.  Normal operation may be impaired if the remote 
control hand unit is operated from behind a bulkhead or other structure such 
as a centre console that impedes line of sight communication.
The remote control hand unit is battery powered.  The battery in the unit may 
need to be replaced after 12 months or sooner if used regularly.  The battery 
used is a commonly available CR2032 and can be changed by removing the 4 
phillips head screws from the back of the unit.  NOTE – Your remote control 
hand unit must be re-synced with your Watersnake motor after changing the 
battery.

1. 

   Left directional button

2. 

   Right directional button

3. 

   On / Off

4. 

   High speed bypass

5. 

   Increase / decrease speed

SLIDER PRO

Содержание Slider Pro SWRC 54/54

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды