manualshive.com logo in svg

Watersnake Slider Pro SWRC 54/54, Руководство пользователя

Поделиться
Скачать
Watersnake Slider Pro SWRC 54/54 Скачать руководство пользователя страница 3

www.watersnake.com.au

3

PRE INSTALLATION CHECKLIST

• Familiarise yourself with the user manual and the various parts of your  
   Watersnake motor

• Select desired mounting location on boat

• 12 v deep cycle marine battery (your Watersnake motor is not designed for 
   use with car / truck / motorcycle type batteries) – for more information 
   about appropriate batteries for your Watersnake motor, refer to page 9

• Check battery cable length in relation to location of your 12v deep cycle 
   battery.  If extension to battery cable is required, refer to table on page 9
   NOTE – if extending battery cable ensure that the circuit breaker remains 
   in place on the positive wire

PRE-USE CHECKLIST – CHECK BEFORE EACH USE

• Ensure that your Watersnake motor is securely attached to your boat 
   (refer to page 5 of manual)
• Fully charged 12v deep cycle marine battery (your Watersnake motor is 
   not designed to be used with a car / truck / motorcycle type battery)
• Check battery cable for any signs of damage or exposed wiring
• Check terminals for any signs of corrosion or debris
• Check fuse assembly / circuit breaker – clean if any signs of corrosion or 
   debris.  Replace fuse if necessary.

SLIDER PRO

Содержание Slider Pro SWRC 54/54

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды