background image

www.watersnake.com.au

29

GPS USER INSTRUCTIONS

NAVIGATE MODE 

When entering or resuming Navigate Mode, ensure that no hazard such 
as shallows, snags or rocks lie in a direct path between your vessel and 
the Spot or Track it is navigating to. If there is a bridge or  a waterway 
surrounded by high buildings between your vessel and the Spot or Track, 
your Watersnake GPS also may lose satellite signal and fail to proceed on 
its navigated course. Maintain a safe speed and keep a proper lookout at all 
times when in Navigate Mode.  
Navigate mode enables the user to precisely 
follow a saved track, turn by turn, up to 5km long. 
It is particularly helpful for trollers, who can use 
Navigate in conjunction with Cruise mode to get 
perfect lure speed. Lure casters might prefer to use 
Navigate to work a saved track along a shoreline, 
adjusting speed manually as they work specifi c 
areas before moving on. 

Select Navigate mode, Key 6, to enable your 
Watersnake GPS motor to navigate back to a saved 
Spot or Track within 1km away. 

• To navigate back to a saved Spot, press Key 6 
to enter Navigate mode, then use Menu keys to 
select the saved Spot number (within 1km away), 
press Confi rm. Select speed, apply power and your 
Watersnake GPS will navigate back to that spot. 
Once reached, it will enter Anchor mode.
Function screen displays Spot #, Distance to, 
Bearing to. Menu screen displays: Back, Confi rm.

• To navigate back to a saved Track and then follow 
it, press Key 6 to enter Navigate mode. Then use 
Menu keys to select Track number, press Confi rm, 
select which way along your chosen track to 
proceed (start/end), and your Watersnake GPS will 
navigate back to the start/end of that track. Once 
the track end is reached, motor will enter Anchor 
mode. You can also select other end modes in the 
Settings menu.
Function screen displays; Spot #, Distance to, 
Bearing to Menu screen displays: Back, Confi rm

NOTE:

 You may navigate to or along a track or to a 

spot while your Watersnake GPS is in Cruise Mode.

6

Содержание GEO-SPOT GPS SW65/54













































Отзывы: