Watersnake GEO-SPOT GPS SW65/54, Руководство пользователя

Страница: 14 / 44

Watersnake
14
• Depress and HOLD locking lever (A) and SIMULTANEOUSLY slide the shaft
(B) up towards you, through the pivoting turnbox. Release locking lever (A) and
continue sliding until the propeller unit sits back in the opened locking cradle.
There should be a click as cradle locks into Stowed position and the locking lever
comes up.
• To prevent accidental deployment, slide the depth collar
(C) down the shaft to
the turnbox and tighten.
• Ensure your motor is properly stowed and secured before high-speed travel on
the water or on the road. Additional support of the head unit may be required.
Watersnake accepts no liability for injury or damage caused by the incorrect
deployment or stowing of this motor.
Ensure your motor is
Properly stowed and
secured before Driving
and or moving your
boat to avoid damage.
HOW TO STOW YOUR WATERSNAKE BOW MOUNT
ELECTRIC MOTOR.
Watersnake Distribution Pty Ltd accepts no
liability for injury or damage caused by the
incorrect deployment or stowing of this motor.
PLEASE NOTE:
STOWING INSTRUCTIONS
IMPORTANT
PLEASE READ BEFORE USE.
Failure to stow your Watersnake as described below may damage your unit,
invalidating its warranty, and could injure you and/or other people.