background image

www.watersnake.com.au

25

GPS USER INSTRUCTIONS

ANCHOR MODE 

Press Anchor mode (Key 13) and the motor enters 
Anchor mode immediately, referring to GPS position 
where key was activated. Motor will navigate boat 
back to position, nominal accuracy 2m in favourable 
conditions.
Status light is BLUE
Function screen displays distance from anchor 
point, GPS bearing back to anchor point.
Menu screen displays: Exit = exit Anchor mode; 
Save = save current anchor point. 
Press Anchor mode key again to exit.
To save a current Anchor spot to memory, ensure 
Save appears in menu screen display and depress 
Key 3. Up to 16 spots can be saved.

13

3

Do not rely on Anchor Mode as your vessel’s sole means of anchoring. 
Anchor Mode is for short-term position holding in light conditions and is 
not to be relied on to maintain a vessel’s position in signifi cant current, 
wind, weather or tide. 
A vessel in Anchor Mode is considered by the International Regulations for 
Preventing Collisions at Sea (Colregs) to be “under way” and should display 
appropriate lights and practise relevant collision avoidance.
Do not use Anchor Mode in busy channels or shipping fairways.

• Anchor Mode is Key 13, at bottom centre, with anchor icon. 
• Press once to activate; alert tone should sound, status light should glow 
steady BLUE and boat should remain within 2m of the point where you hit the 
Anchor key. Remote display should indicate distance to Spot. It is preferable 
to slow down before entering Anchor Mode to avoid overrunning the target, 
as your Watersnake GPS motor returns to the exact position where key was 
activated. 
• To quit Anchor Mode and revert to Manual Mode, press Anchor key 13 again. 
Exit alert tone will sound, status light will glow GREEN. Power in Manual Mode 
will default to last power level used in Anchor Mode.
• Fine repositioning adjustments can be made in Manual Mode – then press 
Anchor key again to anchor at your new location. 
Your Watersnake GPS can save up to 16 spots and return to them at any time if 
they are less than 1km away. See Remote Instructions section for details.

Содержание GEO-SPOT GPS SW65/54













































Отзывы: