Watersnake GEO-SPOT 80LB/66 Скачать руководство пользователя страница 50 | Manualshive

Страница: 50 / 72

Watersnake GEO-SPOT 80LB/66 Скачать руководство пользователя страница 50

Watersnake Geo-Spot 80LB Bow Mount Motor Manual ( Ver.1)

50

TROUBLESHOOTING

REMOTE CONTROL

• Blank remote screen – not operational – 3 x AAA batteries may need
replacement. Phillips head screwdriver required.
• Screen message “No Connection” –
• Check Base Unit has powered up and status light shows GREEN
• Try restarting base assembly processor and Remote control by powering off
and restarting each.
• Check pairing of remote with base unit by pressing left “Pairing” button
on base when remote is on. “Shave-and-a-haircut” peeps indicate pairing
established.

ERROR MESSAGES

If an error message is displayed on the Remote Control unit unit, an error has
occurred with the motor control system. Please note the contents of the error
message and/or photograph the FOB display message and contact Watersnake
Service via the website contact centre (https://www.jarviswalker.com.au/
contact) to receive more detailed instructions on how the problem can be
resolved.

OPTIONAL FOOT CONTROL

• Check that foot control cable plug is fi rmly connected and locked in.
• Check for debris that may affect operation of pedal controls and cable
connections.
• Check speed control dial is not set to zero
• Restart base unit and recheck.

«
...
48
49
50
51
52
...
»

Содержание GEO-SPOT 80LB/66









































































Отзывы:

Нет отзывов