Watersnake GEO-SPOT 80LB/66, Руководство пользователя, Страница: 31 / 72

www.watersnake.com.au
31
GEO-S
POT
GEO-SP
OT
INITIAL POWER-UP
• Attach your Watersnake Geo-Spot to
2 x 12v deep cycle or 2 x 12v LiFePO4
or 1 x 12v LiFePO4 battery.
• Once your vessel is launched and on the water
deploy the motor and ensure locking
lever is in the up position.
NOTE – Your Watersnake motor is fi tted with a
tilt switch that prevents the motor from running
unless it is in the deployed (vertical) position.
• Hold down the right-hand button ( on/off ) on the fascia panel on mount
assembly until all the lights illuminate.
• The four lower LEDs indicate battery condition.
They register as green or unlit, depending on charge remaining.
Motor in
deployed
position