Watersnake GEO-SPOT 80LB/66, Руководство пользователя, Страница: 37 / 72

www.watersnake.com.au
37
COURSE MODE
(the “true” course bearing as it would
appear on a marine chart.)
Screen function area displays:
Course mode icon, course bearing from boat.
• Choose between heading and course by
selecting settings section under red Key 3,
then fi x menu.
• You can use the grey L or R keys to readjust
heading or course. A new heading direction
or course will appear in the remote screen.
• To quit Pilot mode, simply press the
Pilot mode key again.
• Foot pedal controls also operate in Pilot mode.
CRUISE CONTROL
Press the cruise key 12 to enter or exit this mode. In
this mode, the motor will run at a selected “speed
over ground”, ie, GPS speed in relation to the
bottom – not the speed in relation to current, wind,
tide or other effects on the boat as it travels on the
water. Screen Function area displays: current target
speed.
To adjust speed in cruise mode, depress grey Speed
Up or Speed down keys ( Keys 7 and 11 ).
Speed over ground will increase or decrease by
0.2kmh for every keystroke.
Note: Cruise function cannot be started when
propeller is not turning. Cruise function can be
operated simultaneously with Navigate mode or
Course/Heading mode.
GPS USER INSTRUCTIONS
GPS SPEED
The speed readings displayed on your remote indicate speed over the bottom
or “speed over ground” and do not refl ect the actual speed of your boat
through the water. Water speeds are affected by wind, tides, current, wave
action and many other variables.