Watersnake FIERCE 2 54LB/48, Руководство пользователя

Страница: 6 / 44

Watersnake Fierce 2 Bow Mount Motor Manual ( Ver.1)
6
Power Drill
Phillips Head
Screwdriver
Spanner/
Shifter
Prop Nut Wrench
Marine Grease
Hex
Key
Drill
Bit
THE BELOW INFORMATION IS FOR THE USA ONLY.
PRE INSTALLATION CHECKLIST
• Familiarise yourself with this user manual and the various parts of your
Watersnake motor, labelled in the illustrations.
• Select desired mounting location on boat.
• 12v deep cycle or LiFePO4 battery (your Watersnake motor is not designed
for use with car / truck / motorcycle or marine cranking batteries) – for
more information about appropriate batteries for your Watersnake motor,
refer to page 17.
• Check battery cable length in relation to location of your 12v deep cycle or
LiFePO4 battery. If extension to battery cable is required, refer to table on
page 18.
FITTING THE MOTOR TO THE BOAT TOOLS REQUIRED
• Power drill
• 6mm drill bit
• Phillips head screwdriver
• Hex key, 5mm
(for optional quick
release plate
mounting)
• 10mm spanner/shifter
• Prop nut wrench
(supplied)
• Marine grease
PLEASE NOTE:
Your Watersnake motor does not come supplied with any mounting hardware.
Mounting hardware is only included with the optional Watersnake quick
release nylon or alloy brackets. See page 7 and 8 for mounting hardware.