Watersnake FIERCE 2 54LB/48, Руководство пользователя

Страница: 30 / 44

Watersnake Fierce 2 Bow Mount Motor Manual ( Ver.1)
30
MOTOR HAS DIFFICULTY STEERING
• Check if coiled power lead from base to motor head is tangled/knotted
around shaft. Stop and unravel or raise shaft from turnbox collar and manually
rotate to disentangle.
DIFFICULTY DEPLOYING OR STOWING
• Ensure you follow correct deploy/stow process (refer Stow and Deploy
section in this manual. Pages 17 -22 ).
• Check for obstructions within the mounting assembly.
• Lubricate shaft with spray lubricant. Concentrate spray on area where shaft
runs through turnbox.
• Clean any debris from the mounting bracket.
• Remove the side covers from the mounting bracket and apply marine grease
to moving parts of the stow/deploy mechanism
TROUBLESHOOTING
REMOTE CONTROL
• Remote not operational – 2 x AAA batteries may need replacement.
Phillips head screwdriver required. See page 26 for instructions.
• Remote on but not connected to the motor. Pair the remote to the
motor see page 25 for instructions.