Watersnake FIERCE 2 54LB/48 Скачать руководство пользователя страница 13

www.watersnake.com.au

13

BATTERY AND POWER

BEST PRACTICES

INSTALLING AND CONNECTING YOUR FIERCE 2 MOTOR

1.

 Your Watersnake motor is designed to be powered by a 12v deep cycle or  

    LifePO4 battery that should output no more than 14.5v. If the voltage input 
    to your Watersnake motor exceeds 14.5v it may damage the sensitive 
    electronics and void your warranty. 

    If you are unsure about the voltage output of your battery, contact your 
    battery supplier or consult a marine auto electrician.

2.

 This Watersnake motor is compatible with a battery system that is being 

     charged by an alternator or solar system, so long as the voltage input to the 
     Watersnake motor does not exceed 14.5v whilst the battery is being charged. 
     If you are unsure about the voltage that your motor is receiving, consult a 
     marine auto electrician.

3.

 Route the wiring from the battery to the trolling motor on an alternate route 

     or path to other wiring on the boat. If possible, it is preferable the wire is fi tted 
     to the opposite side of the boat to other wiring.

4.

 If you have to extend the wiring to connect the motor please review the 

     extending battery leads section of the manual (page 14) so you fully 
     understand this process.

5.

 This Watersnake Fierce 2 trolling motor does not require a circuit breaker.

     This motor has built in circuit protection.

CAUTION:

 Please read the following information before you   

connect your electric motor to your batt ery.

BATTERY TYPE

USE A 12 VOLT DEEP CYCLE OR LIFEPO4 BATTERY

Deep-cycle batteries deliver sustained power with low current draw over 
extended periods. They can be drained to low levels without developing a 
“memory” and can be fully recharged hundreds of times over their working 
lives. Do not use a standard car, truck or marine battery (called a cranking 
battery). They are designed to provide a pulse of “cranking power” over a 
short period, can develop a “memory” preventing complete recharge and can 
produce current surges that may damage sensitive electronic components on 
your Watersnake.

Lithium Iron Phosphate (LiFePO4) are the safest lithium battery type. We 
recommend doing your research on a LiFePO4 battery before purchasing to 
make sure you are purchasing from a reputable company. There are many 
cheap lithium batteries on the market that can be harmful to your Watersnake 
motor.

Содержание FIERCE 2 54LB/48













































Отзывы: