Create and load the run's methods and sample list
Before you can collect fractions or purified product using the system, you must
create the run's instrument methods, collection methods, and purification sample
list. You must then load the sample list into the sample list queue.
Create instrument and collection methods, and a sample list:
Alternative:
Follow the procedure below to open and edit the default project's
instrument and collection methods and sample-list files, as needed. Save the edited
files, and then load the updated sample list into the sample list queue.
Requirements:
l
To build stacked-injection sample lists that optimize throughput, you must
first create sequential or pooled collection methods using collection modes
that are time only or time with detector-signal threshold, slope threshold, or
both.
l
Use the Sample List Purification wizard to easily build your stacked injec-
tions from a data file taken from a scouting run.
Rule:
In the case of timed collection with overlapping windows, the start and stop
of the first time window always has precedence over that of the subsequent time
windows.
August 8, 2014, 715003940 Rev. B
23
Create and load the run's methods and sample list
Содержание Prep 150 LC System
Страница 2: ...ii August 8 2014 715003940 Rev B ...
Страница 8: ...viii August 8 2014 715003940 Rev B Preface ...
Страница 44: ...44 August 8 2014 715003940 Rev B A Safety Advisories ...
