manualshive.com logo in svg

Waters ACQUITY UPLC H-Class Series, Системное руководство, Страница: 13 / 92

Поделиться
Скачать
Waters ACQUITY UPLC H-Class Series Скачать руководство пользователя страница 13

1

ACQUITY UPLC H-Class Series
System

The ACQUITY UPLC H-Class Series system was designed to support HPLC, UHPLC, and UPLC
methods. The low dispersion of the system allows you to maximize chromatographic resolution
for the most challenging and complex separations. Software and hardware tools enable simplified
transfer of methods and support automated method development.

1.1 UPLC technology

In 2004, Waters made significant advances in instrumentation and column design to introduce
UPLC technology to the field of separation science. By employing this technology, Waters’
ACQUITY UPLC systems achieve a marked increase in resolution, speed and sensitivity in liquid
chromatography when compared to conventional systems.

UPLC technology is based on columns packed with 1.7 µm-diameter, spherical particles coupled
with low dispersion systems, allowing you to realize the full separation potential of these highly
efficient columns.

April 4, 2018, 715005702 Rev. A

Page 13

Содержание ACQUITY UPLC H-Class Series





























































































Отзывы:

Нет отзывов