Waters Network Systems
2800M/MR User’s Manual
Page 31
of hours, according to the starting date and the ending date. For example, if you set the daylight
saving to be one hour, when the time passes over the starting time, the system time will be
increased one hour after one minute at the time since it passed over. And when the time passes
over the ending time, the system time will be decreased one hour after one minute at the time
since it passed over.
The switch supports valid configurable daylight saving time is –5 ~ +5 step one hour. The zero
for this parameter means it need not have to adjust current time, equivalent to in-act daylight
saving. You don’t have to set the starting/ending date as well. If you set daylight saving to be
non-zero, you have to set the starting/ending date as well; otherwise, the daylight saving
function will not be activated.
Default for Daylight Saving: 0.
The following parameters are configurable for the function Daylight Saving and described in
detail.
Daylight Saving Start :
This is used to set when to start performing the daylight saving time.
Month:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default: 1
Hour:
Range is 0 ~ 23.
Default: 0
Daylight Saving End :
This is used to set when to stop performing the daylight saving time.
Month:
Range is 1 ~ 12.
Default: 1
Day:
Range is 1 ~ 31.
Default: 1
Hour:
Range is 0 ~ 23.
Default: 0
