WaterRower Indo-row A1, Руководство пользователя

Страница: 15 / 28

14
STEP 3
Place the tank assembly (B) on the sub rails (C) in the direction shown in
the picture below.
Using the Allen key (M) and 4 pairs JCN nuts (F) and JCB bolts (E),
attach the forward riser bracket to the rails. You may need to apply slight
pressure to align bracket and rail holes. May have to loosen top four front
foward riser bolts. Do not tighten all the way.
E
F
× 4
× 4
M
× 2
It may be necessary to slightly
loosen the 2 bolts on the top deck
to allow the footboard clearance.
STEP 4
First remove the back of Footboard Bolts (K) from behind the
footboard. These bolts are used in steps 7 and 9.
Place the footboard on the rails, then attach the sensor cable to
the monitor cable protruding from the back of the footboard.
The sensor cable may be taped to the back of the footboard. If
so, remove the tape.
Feed the cable gently through the brackets so it does not get
trapped between the footboard and tank assembly.
Align gold rivnuts on the tank assembly with the footboard’s
handle rest holes.
K