Waterous Pressure Governor, Инструкция по установке и эксплуатации

Страница: 32 / 53

32
|
53
Safety Introduction Product Overview Installation Operation
Connecting the Cable—Interlocks, Discharge Pressure Sensor, and Analog Control
2
1
3
Use the illustration and instructions to connect the
cable to the appropriate component or controller.
Use the wire label to determine the appropriate
connector.
1 Connect the appropriate connector to the
pressure governor.
2 Connect the appropriate connector to the
discharge pressure sensor.
3 Connect the interlock wires to the appropriate
engine controller or relay.