Waterous CM Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 8 / 28

8
|
28
Safety Introduction Product Overview Operation Maintenance
CM Series Pump Overview
The CM series pump is capable of operating in 2 modes. The 2-stage design allows you to operate the pump in pressure or volume mode. An electric or manual
panel-mounted controller operates the transfer valve in the pump that directs the flow to operate the pump in either mode. The pump is available with many intake
and discharge options. Understand that this instruction may not include all the options in your application.
Pressure Mode
In pressure mode, the 2 stages operate in series. The fist stage sends pressurized water to the second stage. The second stage further pressurizes the water
before sending it into the pump discharge at a maximum pressure of 600 psi (41 bar).
Volume Mode
In volume mode, both stages operate in parallel. Each stage flows water directly into the pump discharge to provide maximum flow.