Waterous Advantus Foam Manager, Руководство по эксплуатации и обслуживанию

Страница: 4 / 8

F − 1031, Section 2407 Page 4 of 8
System Components
Table 1. System Components
Ref. No. Description
1 Advantus
t
Foam Pump (Proportioner)
2 Foam Pump Inject/Bypass Valve
3 In − line Foam Concentrate Strainer
Ref. No. Description
4 Foam Manifold
5 Advantus t Foam Pump OIT (Control Panel)
6 Advantus t Operation Instruction Panel Plate
7 OIT Cable
Figure 1. System Components
1
4
2
5
3
To Foam Tank
6
3 7
Items Shipped Loose
with Advantus Foam Pump
IL3001
Operation
A pumper equipped with a Foam Manager t foam unit can
be operated in water only and/or foam modes. It is pos-
sible to pump water from one discharge and foam solution
from another discharge.
Water Only Operations
All unit operations begin with pumping water. See the fol-
lowing instruction for details on how to operate and pump
water from your Waterous fire pump:
• F − 1031, Section 2114, Operation and Maintenance
Instructions for Waterous CMU Series Centrifugal Fire
Pumps
or
•
F − 1031, Section 2115, Operation and Maintenance
Instructions for Waterous CS and CSU Series Centrif-
ugal Fire Pumps
CAUTION
Overheating hazard.
May cause damage to the pump.
Running the unit without adequate water flow or an
overheated water supply can cause damage to the
pump.