![background image](http://html1.mh-extra.com/html/waterman/basic/basic_assembly-and-operating-instructions-manual_3633476025.webp)
Assembly and Operating Instructions 'Basic' Pools
English
25
1
4
6
7
8
9
6
2
3
5
1
1 = Ground
2 = Concrete slab
3 = Iron reinforcement
of concrete slab
4 = Concrete backfill
5 = Retaining wall
6 = Styrodur panel 20 mm
7 = steel wall
8 = Interlocking profile
9 = Liner
STEEL WALL SETUP
INSTALLATION OF LINER
TOP RAIL & CONCRETE BACKFILLING
All further assembly steps and prescribed regulations
are the same as for round pools. Please continue reading
on page 15 of this manual.
FIXING THE STEEL WALL
TO THE RETAINING WALL
After the steel wall has been set up, it must be
fastened to the side retaining wall in the upper area
(approx. 10 cm below the top rail) with dowels and
countersunk head screws. Depending on the size
of the pool, we recommend to place 1 dowel (6 mm)
each at a distance of 50 cm and to fix the steel wall
with a countersunk head screw. Following this, pad
the screw heads with a PVC-compatible adhesive
tape (not included in the delivery) from inside the
pool to protect the liner.