WL15
Manual
Page 39 – Revision: 4-15-22
WL15: HOT TANK RESET
1.
Remove the upper panel of the WL15 by removing the screws shown in red and set the
upper panel aside.
UNPLUG THE MACHINE FROM THE POWER SOURCE.
2.
Locate the hot tank. Then locate the high limit overload thermostat on the tank. From
this perspective, it will be difficult to see. The photos below illustrate what to look for.
3.
Press the small gray button at the center of the thermostat. This will reset the contacts
inside the thermostat.
4.
Plug the unit back into the power source and reinstall the top cover and screws.