background image

 

CUBE

 Manual 

                                                                        Page 7 - Revision:  5-24-2017 

 

 

CUBE CERTIFICATIONS

 

 

Waterlogic Water Treatment Systems have been tested, and certified to rigorous NSF and UL 

Standards.  We believe that performance testing and certifications validate Waterlogic as a world-

leader in water treatment systems.     

CUBE

 

Water Treatment System

 Certifications Include 

NSF/ANSI-55 Class A –Ultraviolet Microbiological Water Treatment Systems 

Water Quality Association is an international standards organization.  Firewall™ Technology 

contains our latest, most innovative and patented breakthrough, “The Firewall™”, the most 

comprehensive UV purification system for point-of-use water treatment systems ever 

developed. The Waterlogic Firewall components has been tested and certified by the Water 

Quality Association (WQA) to NSF/ANSI-55 Class A – Ultraviolet Microbiological Water 

Treatment Systems, and to NSF/P231 and the USEPA Standard for Microbiological Water 

Purifiers.  

 

                      

NSF P231 –Protocol for Microbiological Purifiers  

The Public Health and Safety Organization establishes minimum requirements for health and   

sanitation characteristics of microbiological water purifiers. The requirements are based on 

the recommendations of the U.S. Environmental Protection Agency's Task Force Report. 

 

NSF/ANSI-42 – Chlorine, Taste and Odor Reduction  

NSF/ANSI-53 – Lead and Cyst Reduction  

The Public Health and Safety Organization establishes minimum requirements for materials, 

design, construction, and performance of drinking water treatment units that are designed 

to reduce specific aesthetic-related contaminants in public or private water supplies. 

 

UL399 – Certified Drinking Water Cooler 

Intertek Labs (ETL) Certified the CUBE 

Water Treatment System

 to ANSI/UL 399 Standard for 

Drinking Water Coolers. 

 

BPA Free - Waterlogic

 tests for BPA and declares that all of its products are Bisphenol-A 

FREE and contain no harmful BPA plastics. 

 

 

 

Waterlogic is certified to ISO 9001:2015 – Quality Management Systems 

(certified by Intertek).  ISO 9001 is the internationally accepted standard 

for well managed organizations that have adopted the key quality 

management principles to its operations to bring consistent quality 

products and a culture of continuous improvement. 

Safe Drinking Water Act 

Waterlogic water treatment systems conform to the Safe Drinking Water Act (SWDA) “lead-free” 

amendment effective January 4, 2014. 

Содержание CUBE FIREWALL






















































































Отзывы: