BLUPURA
Fizz 80
Manual
Page 10 ‐ Revision: 11‐2‐2018
DAILY MAINTENANCE REQUIRED BY CUSTOMER
Keep your
BLUPURA FIZZ 80 Water Treatment System
in showroom condition and disinfected.
1.
Clean outside of the
BLUPURA FIZZ 80 Water Treatment System
by hand with a disposable
towel and a rinse free anti‐citrus product. To remove lime stains, use a stainless‐steel
cleaning product with a disposable towel.
*To remove limescale, use a slightly acidic product (e.g. citric acid) that has been heavily
diluted. Excessive acidity may damage the surface of the steel.
2.
Clean Grill and Drip Tray with non‐foaming detergent or a diluted limescale cleaner such as
citric acid and a plastic brush. *The Drip Tray may be washed in the dishwasher.
3.
Glass facing on front of unit may be cleaned using multi‐use cleaners or dedicated glass
cleaners.
NOTE:
DO NOT USE THE FOLLOWING PRODUCTS!
Using the following product can cause
surface pitting, oxidization and give the impression that the surface of the product is rusting.
Full strength bleach. Only use bleach diluted 1‐
part bleach to 4 parts water.
Metal fibers (if a brush is needed, use plastic
brushes).
Abrasive cleaners or abrasive pads.
Water jet.
4.
Inside of Tap Dispensing Spouts sanitization.
a)
Clean inside of spout thoroughly and remove any
traces of limestone with a non‐foaming detergent.
b)
Rinse thoroughly with potable water.
c)
Utilizing a spray bottle, prepare a solution of
hydrogen peroxide or sodium hypochlorite, with 10%
dilution. Cleaning with a disinfectant solution that is
hydrogen peroxide‐based. This solution must be
replaced on a weekly basis as it has a duration of 7
days to be effective.
d)
Use a cotton swab to sanitize with solution inside
taps.
e)
After 3‐5 minutes rinse with potable water.
NOTE:
DO NOT USE FULL STRENGTH BLEACH!
Dilute 1 part bleach to 4 parts water.
All outside
surfaces.
1.
Glass
3.
2.
Grill
and Drip
Tray
4.
Sanitize inside Tap
Spouts
