Waterline PPMFM60SS, Инструкция по установке и эксплуатации

Страница: 9 / 39

Connecting to the mains power supply
Electrical connections must be made as per the connection plate fixed to the back of the appliance by an lectrical fitter who must ensure that
the appliance has been connected up in accordance with fitting instructions and local regulations.
Connecting to the mains power supply(Continued)
Where the appliance is not connected to the mains electricity supply by a plug, an Omni polar cutout device (with a contacts gap of at least
3 mm) must be fitted on the supply side of the connection to meet safety requirements.
When power is connected, the electronics of the oven are initialized; The electric cable (H05VV-F, Min 1.1m, 3X2.5mm²) must be
long enough for it to be connected to the built-in oven standing on the floor in front of its unit.
Open the back cover of the oven at the bottom (using a flat-bladed screwdriver) and completely unscrew the connection screw and
the cable clamp before fitting conducting wires into the appropriate terminals.
The earth wire must be connected to the terminal of the oven.
If the oven is connected to the power supply by a plug, this must remain accessible once the oven has been fitted.
We cannot accept any liability in the event of an accident resulting from non-existent or faulty earthing.