Waterline Technology AlwaysFresh H2O AP-UCBS-KIT, Инструкция по установке и эксплуатации

Страница: 15 / 20

Page 15
Symptom Possible Causes Remedies
10. Poor tasting coffee. Water deposits are plugging the spray head or
siphon tube.
The brewing temperature has not been adjusted
correctly.
The amount of coffee being used may not be
correct.
More than one paper filter was used when brewing.
The brewer appliance should be cleaned regularly.
Clean the spray head. See the Maintenance And Cleaning
section.
Adjust temperature .
Change the amount of coffee being used.
Use only one paper filter for each brew cycle.
See the Maintenance And Cleaning section.
11. There are coffee grounds
in the brewed coffee.
Using too much coffee or coffee that has been
ground too fine.
Incorrect type of paper filters being used.
Two paper filters may have been used accidentally.
Adjust the amount of ground coffee being used or adjust the
grind of the coffee. Too much coffee or coffee that is ground too
fine may slow the flow of the water through the coffee.
Make sure that the paper filter being used is correct for this type
of coffee appliance. Contact Waterline to order coffee filters.
Use only one paper filter per brew cycle.
12. Coffee/water overflows
from top of brew cone.
Using too much coffee or coffee that has been
ground too fine.
Removal or absence of stainless steel spring at
bottom of cone.
Incorrect type of paper filters being used.
Adjust the amount of ground coffee being used or adjust the
grind of the coffee. Too much coffee or coffee that is ground too
fine may slow the flow of the water through the coffee.
A coiled stainless spring is affixed in the cone. Be careful when
cleaning or dumping coffee grounds not to discard this device.
Make sure that the paper filter being used is correct for this type
of coffee appliance. Contact Waterline to order coffee filters.
If the steps in this trouble shooting guide should fail to solve your problem, unplug the brewing appliance and contact
Waterline at 1-800-522-3949
This trouble-shooting guide is for the installers use only. Operator should refer to the operating instruction only.