WATERKOTTE EcoTouch DS 5050T, Планирование и установка

Страница: 30 / 48

Pipe & instrumentation / measurement & control technology
04.12.2015
30 / 48
Copyright

2014 by: WATERKOTTE GmbH. Subject to changes.
9 Pipe & instrumentation / measurement & control technology
Figure 6: EcoTouch DS 5050T
Symbols refer to DIN 19227, page 1
No. Instrumentation Part
PIC/1 Measurement of pressure, readout in the controller
display and control in the electrical switchboard Pressure transmitter ND
TIC/2 Measurement of temperature, readout in the controller
display and control in the electrical switchboard NTC 10K, gauge: suction gas
overheating
TIC/3 Measurement of temperature, readout in the controller
display and control in the electrical switchboard NTC 10K, gauge: condenser OUT
= Heating flow
TIC/4 Measurement of temperature, readout in the controller
display and control in the electrical switchboard NTC 10K, gauge: condenser IN =
heating return
PIC/5 Measurement of pressure, readout in the controller
display and control in the electrical switchboard Pressure transmitter HD
PZ+/6 Safety pressure relief valve Safety pressure switch
TIC/7 Measurement of temperature, readout in the controller
display and control in the electrical switchboard NTC 10K, gauge: heat source OUT
Vd
TIC/8 Measurement of temperature, readout in the controller
display and control in the electrical switchboard NTC 10K, gauge: heat source IN
Vd
TZ+/9 Measurement of temperature: pressure gas sensor
compressor 1 Pressure gas temperature sensor
TZ+/10 Measurement of temperature: pressure gas sensor
compressor 2 Pressure gas temperature sensor
No. Part Design
1 Compressor full hermetic scroll
2 Condenser steel plate pack, copper soldered
3 Filter dryer
4 Refrigerant inspection
glass
5 Expansion valve electronic
6 Evaporator steel plate pack, copper soldered
TI C TIC T I C
T IC T I C
PI C
8 1
2 3
4 7
P Z+
6
P IC
5
3
5
6 2
4
1
T Z+
9
T Z+
10