background image

Copyright 2004 Waterford Precision Cycles, Inc. - All Rights Reserved.

Page - 14

Care and Maintenance

The Fitmaster is designed to give years of  commercial use with a minimum of care.  Below are

measures that insure the proper functioning of your Fitmaster:

1.  Lubricate all threads during  assembly and re-assembly.
2. Keep all machanical parts - chain, hubs, bottom bracket properly adjusted and lubricated.
3. Keep the seatpost and sliders lubricated with a light coating of lithium grease or equivalent.
4. Pivot points should be kept lubricated with a 3-in-1 oil or equivalent.
5. Periodically remove and re-grease the seatpost and any other moving parts as you would your

bicycle.

6.  Wipe down your Fitmaster with a damp cloth after every fit session.
7. Periodically remove the front plate and apply a light coating of grease to the underside to keep it

sliding smoothly over the base.

Warranty

Waterford Precision Cycles, Inc. ("Waterford") warrants against all defects in material or work-

manship for Waterford-produced parts for a period of one year from the date of purchase.

This warranty does not cover normal wear and tear, normal maintenance items or any damage,

failure or loss caused by:

1.

Accident, misuse, neglect, abuse or improper maintenance.

2.

Structural modifications made by anyone other than Waterford Precision Cycles.

3.

Failure to follow instructions or warnings in the owner's manual.

This Warranty is applicable to the original purchaser only.

This Warranty does not cover separately sold products including wheel, tires, chain, seatpost,

crank and bottom bracket.  Please address any warranty claims to the respective manufacturer.

Waterford will, at its option, repair or replace a defective product.  Dealer labor charges are

not covered by this warranty.

Waterford is not liable for incidental or consequential damages.  Repair or replacement of

defective products is the sole remedy under this warranty.

If you elect to repair a damaged or defective Waterford product through a source other than

Waterford then Waterford will not be liable for the defect(s) or damage caused by such repairs.

816 W.B

AKKE

 A

VE

.

P

HONE

 262.534.4190

 

W

ATERFORD

, W

ISCONSIN

 53185

F

AX

 262.534.4194

waterfordbikes.com

Содержание FITMASTER















Отзывы: