manualshive.com logo in svg

Waterco Side Discharge, Руководство пользователя и по уходу

Поделиться
Скачать
Waterco Side Discharge Скачать руководство пользователя страница 9

I pg 08

Pool Heat Pump

IMPORTANT

Electrical

To ensure your safety and ensure the adequate functioning of your pool heat pump, all 
electrical 

work should be performed by a fully qualified and licensed electrician in 

accordance with local electrical codes.

An adequate circuit breaker and copper wiring must be used. This information is available 
on the name plate of the pool heat pump. It may be necessary to install a ground circuit 
breaker.

THE POOL HEAT PUMP MUST BE DISCONNECTED BEFORE
OPENING THE ACCESS PANEL. 

WARNING

!

Electrical Connection

Standard 60 Hz power supply :  208/240 v - 60Hz-1 phase

Standard 50 Hz power supply :  208/240 v - 50Hz-1 phase

3 phase power supply  

    :  200/230 v - 50/60 Hz - 3 phase

 

 

 

       380/420 v - 50/60 Hz - 3 phase

Breaker Size

Please consult name plate on the base or the side of your pool heat pump for running 
amperage and required breaker size.

Electrical Wire Size

Please consult a qualified and licensed electrician. 

WARNING

!

The power cable ground must be connected to the electrical panel and to the ground
lug of the pool heat pump. An improper installation may be a potential cause of fire,
electrical shock or injury.

INSTALLATION INSTRUCTIONS 

Содержание Side Discharge





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды