Model
Weight
(kg)
Supply
Voltage
(volts)
Frequency
(Hz)
Amps
Minimum
Circuit
Size
(Amps)
IP
Rating
Max
Pressure
(kPa) @
31m head
2.4 kW
3.5
240
50
10
15
IP23
300
3.6 kW
3.5
240
50
15
20
IP23
300
4.8 kW
3.5
240
50
20
25
IP23
300
6.0 kW
3.5
240
50
25
30
IP23
300
10.8 kW
9.4
415
50
15 /phase
20
IP23
300
14.4 kW
9.4
415
50
20 /phase
25
IP23
300
18.0 kW
9.5
415
50
25 /phase
30
IP23
300
24.0 kW
9.5
415
50
35 /phase
40
IP23
300
SPECIFICATIONS
ELECTRICAL & WIRING
• The electrical wiring must be permanently hardwired by qualified electrician in
accordance with all the local wiring rules.
• A properly rated isolating switch must be connected from the supply to the digiHeat
with a minimum rated power circuit as specified on the table below.
• To access and carry out the electrical connections, the front cover with the digital
controller needs to be removed. The front cover of the digiHeat is hinged from the
bottom to make it easier to remove and replace.
To remove the front cover :
i) remove the 6 spring loaded quarter turn locking pins first
ii) pull the cover gently from the top
iii) now slide the cover across to the left to disconnect the hinges.
DigiHeat Titanium Single Phase
DigiHeat Titanium Three Phase
digiheat Titanium In line Spa Heaters I 03
This equipment must be installed and serviced by a qualified technician.
Improper installation may result in property damage, serious injury or death.
Improper installation and/or operation will void the warranty.
WARNING
!
